Unité de Chimie Environnementale et Interactions sur le Vivant

Sébastien ROYER

Professor

Catalytic Treatment and Clean Energy (TCEP) Team

Sébastien ROYER

UCEIV UR 4492 – EiLCO 

Université du Littoral Côte d’Opale
MREI 1, 145 avenue Maurice Schumann,
59140 Dunkerque, France
 

Mail : sebastien.royer@eilco.univ-littoral.fr

ORCID : 0000-0002-5635-0144

Introduction and career history

Sébastien Royer is a University Professor at the Université du Littoral Côte d’Opale (ULCO), within the École d’Ingénieurs du Littoral Côte d’Opale (EiLCO) and the UCEIV UR 4492. After qualifying as a Process Engineer from the University of Technology of Compiègne (2000), he went on to obtain a DEA in applied chemical kinetics (Paris VI – ENSPM), followed by a PhD in Chemical Engineering from Laval University (Quebec, Canada) in 2004, where he specialised in heterogeneous catalysis. Following two postdoctoral fellowships at IFPEN and the University of Lille 1, he joined the University of Poitiers in 2006 and defended his HDR in 2013.

From 2006 to 2015, at IC2MP (University of Poitiers, CNRS), he developed research focused on the synthesis and characterisation of materials for heterogeneous catalysis, with applications in environmental science and fine chemicals. During this period, he was also an Associate Professor at Laval University (2010–2015).

Appointed Professor at the University of Lille in 2015, he founded and leads the MATCAT team – Materials for Catalysis, established in 2016 within the UCCS. At the same time, he developed the UPCAT (UP-scaling of CATalysts) technology platform, dedicated to the synthesis, formulation and upscaling of catalysts. These activities have enabled him to build a research team, develop academic and industrial collaborations, and support the transition of materials from the laboratory to pre-pilot scale.

Since September 2024, he has been a Professor at ULCO, EiLCO and UCEIV. His research is currently focused primarily on decarbonisation, energy and environmental issues : CO₂ activation and conversion, ammonia synthesis and cracking, hydrogen production and storage, process electrification, porous materials for separation and adsorption, and polymer recovery.

Research topics

Current research focuses on the design of functional materials, understanding how they evolve under reaction conditions, and their application in catalytic and adsorption processes. The main areas of research at present are :

  • Catalytic materials for energy and decarbonisation : carbides, nitrides, oxides, perovskites, MXenes and hybrid materials.
  • Activation of small molecules : CO₂, N₂, NH₃, H₂ and CO; synthesis and cracking of ammonia; RWGS, methanation, hydrogen production.
  • Dynamics of active phases undergoing reaction : in situ transformations, metal–support interactions, interface restructuring and control of non-equilibrium active states.
  • Supported metal nanoparticles : Ni, Co, Fe, Cu, Mo and multi-metal systems; control of size, dispersion and stability.
  • Porous materials and adsorption : silicas, zeolites, MOFs, bio-based composites; gas separation and purification, CO₂ capture and pollution control.
  • Shaping and scaling: monoliths, extruded materials, granules and MOF–biopolymer composites.

Current projects

The projects currently being carried out or coordinated mainly focus on the areas of energy, decarbonisation, catalysis and advanced characterisation.

  • PLASMA-N-ACT (PEPR SPLEEN) — 2025–In progress – ULCO manager.

Development of materials and concepts for nitrogen activation and plasma-assisted ammonia synthesis; partners : ENSICAEN, CentraleSupélec, INSA Rouen and the University of Poitiers.

  • CASIBIO (ANR) — 2023–In progress.

Development of bio-based catalytic materials and processes, in collaboration with, amongst others, IRCER and UCCS.

  • NH3CRACK (CPER ECRIN) — 2025–In progress – coordinator.

Development of catalysts for the thermal cracking of ammonia and the production of hydrogen.

  • CATANA-2 (PEPR DIADEM) — 2026–In progress – coordinator.

Catalysis, artificial intelligence and operando characterisation to establish links between structure, active state and catalytic performance; other partners : CEA, the University of Lille, the University of Montpellier and the SOLEIL synchrotron.

  • PLASMA-NH3-CRACK (E-SENSE / ULCO) — 2026–In progress – coordinator.

Catalysts for plasma-assisted NH₃ cracking, for the production of low-carbon hydrogen.

  • E-CP (PEPR SPLEEN) — 2026–In progress – participant.

A project focusing on the electrification of heating systems using the Joule effect, in partnership with ENSICAEN, ENSAM and the University of Lorraine.

  • NH3-PLASMA-CRACK (ANR) — 2026–In progress – participant.

Project focused on enhancing the ammonia cracking process using plasma catalysis. In partnership with IC2MP, UCCS and LRGP

  • EACH (ANR) — 2026–In progress – ULCO manager.

A project dedicated to studying the electrification of the ammonia cracking reaction using Joule heating. In partnership with LCS, LRGP and IRCER

  • IDecarb — since 2024 – development at ULCO.

Establishment of a chair/platform dedicated to materials and processes for decarbonisation: process electrification, CO₂ recycling, H₂ production and storage, and polymer recovery.

collaborations

1. National collaborations

  • UCCS – Université de Lille / CNRS : Jean-Philippe Dacquin – activation of small molecules, ammonia, CO₂, carbides/nitrides and advanced characterisation.
  • IC2MP – Université de Poitiers / CNRS : Catherine Batiot-Dupeyrat, Frédéric Richard – plasma catalysis, hydroconversion and catalysis for energy.
  • LCS – ENSICAEN / CNRS : Ludovic Pinard – ammonia cracking, catalysis and electrified reactors.
  • IRCER – Université de Limoges / CNRS : Cécile Pagnoux, Sylvie Foucaud – ceramic materials, conductive substrates and shaping.
  • LRGP – Université de Lorraine / CNRS : Jean-François Portha, Laurent Falk – process engineering, reactor modelling, intensification and decarbonisation.
  • IRCELYON – Université de Lyon / CNRS : Franck Rataboul, Frédéric Meunier– biomass utilisation, catalysis and sustainable processes; operando.
  • CERAMATH – Université Polytechnique Hauts-de-France : Yves Lorgouilloux, Christian Courtois – formwork, monoliths and porous materials.
  • CEA, Université de Montpellier et synchrotron SOLEIL – collaborations focusing on in-situ characterisation, data science and catalytic materials.

2. International collaborations

  • Wuhan University (Chine) – Zhang Hui : advanced water treatment processes.
  • Beijing University of Chemical Technology (Chine) – Zhang Runduo : oxide materials, environmental catalysis.
  • Technical University of Iasi (Roumanie) – Adrian Ungureanu : heterogeneous catalysis, porous materials.
  • Université Laval (Canada) – Houshang Alamdari : mixed oxides, perovskites, environmental catalysis.
  • Euromed University of Fez (Maroc) – Abdelkrim El Kadib : hybrid materials, biopolymers, MOFs.
  • Mohammed VI Polytechnic University – UM6P (Maroc) – Saïd Laassiri : ammonia synthesis, nitrides/carbides and energy materials.
  • IIT Gandhinagar (Inde) – Sudhanshu Sharma :materials for energy, chemical looping and electrocatalysis.
  • Other academic partners in Colombia and India – collaborations on hydrodeoxygenation, 2D materials, electrocatalysis and electrochemical storage systems.

Supervision

1. PhD students supervised

  • Magali Bonne (2007–2010)
  • Saïd Laassiri (2010–2013)
  • Xin Zhong (2010–2013)
  • Liwei Hou (2010–2013)
  • Rémy Averlant (2011–2015)
  • Carmen Ciotonea (2012–2015)
  • Irina Mazilu (2013–2017)
  • Maïté Audemar (2013–2015)
  • Jérémy Huynh (2014–2017)
  • Shuo Chen (2016–2019)
  • Yin Xu (2016–2019)
  • Ridvan Yildiz (2016–2020)
  • Nisrine Hammi (2017–2020)
  • Amanda Sfeir (2019–2023)
  • Joseph Boulos (2020–2023)
  • Roger Deplazes (2022–2025)
  • Elias El Rassi (2022–2026)
  • Mihaela Bectoras (2023–in progress)
  • Noura Ait Ben Azzouz (2024–in progress)
  • Hamza El Bouhamydy (2024–in progress)
  • Fengyiang Jiang (2024–in progress)
  • Anass Mhairam (2025–in progress)

2. Young researchers under supervision

Postdoctoral researchers, research engineers and early-career researchers under supervision or joint supervision :

  • Ruben Palacio (2013)
  • Fariba Safizadeh (2014)
  • Carmen Ciotonea (2015–2021)
  • Jérémy Dhainaut (2017–2018)
  • Saïd Laassiri (2018–2019)
  • Alla Abramova (2019–2020)
  • Shuo Chen (2020–2021)
  • Camila Abreu Teles (2020–2021)
  • Nisrine Hammi (2021)
  • Amanda Sfeir (2023–2024)
  • Guillaume Pomalaza (2023–2024)
  • Aditi Sharma (2023–2024 ; and 2026–2028)
  • Pawan Kumar (2024–2026)
  • Pradeep Kumar Yadav (2024–2026)
  • Ganesh Jabotra (2026–2027)
  • Oumayma Liaaychi (2026–2028)

Bibliometric indicators

  • 211 publications in A-ranked journals, including 10 journal articles.
  • Over 15,000 citations.
  • Average impact factor of publications over the last five years: > 7.
  • Ranked amongst the top 2 per cent of the world’s most cited researchers (Stanford/Elsevier) for the 2023 and 2024 assessments.
  • h-index : 52.

Publications

The full, up-to-date list of publications is available on theScopus profil of Sébastien Royer.

1. Selected journal articles

  • Royer, D. Duprez, Catalytic Oxidation of Carbon Monoxide over Transition Metal Oxides, ChemCatChem 3 (2011) 24–65.
  • Zhang, K. de Oliveira Vigier, S. Royer, F. Jérôme, Deep Eutectic Solvents: Syntheses, Properties and Applications, Chemical Society Reviews 41 (2012) 7108–7146.
  • Royer, D. Duprez, F. Can, X. Courtois, C. Batiot-Dupeyrat, S. Laassiri, H. Alamdari, Perovskites as substitutes of noble metals for heterogeneous catalysis: dream or reality, Chemical Reviews 114 (2014) 10292–10368.
  • Chen, R. Wojcieszak, F. Dumeignil, E. Marceau, S. Royer, How catalysts and experimental conditions determine the selective hydroconversion of furfural and 5-hydroxymethylfurfural, Chemical Reviews 118 (2018) 11023–11117.
  • Hammi, S. Chen, F. Dumeignil, S. Royer, A. El Kadib, Chitosan as a sustainable precursor for nitrogen-containing carbon nanomaterials: synthesis and uses, Materials Today Sustainability 10 (2020) 100053.
  • Yeskendir, J.-P. Dacquin, Y. Lorgouilloux, C. Courtois, S. Royer, J. Dhainaut, From Metal-Organic Framework Powders to Shaped Solids: Recent Developments and Challenges, Materials Advances 2 (2021) 7139–7186.
  • Mamba, P. J. Mafa, V. Muthuraj, A. Mashayekh-Salehi, S. Royer, T. Innocent, T. Nkambule, S. Rtimi, Heterogeneous advanced oxidation processes over stoichiometric ABO3 perovskite nanostructures, Materials Today Nano 18 (2022) 100184.
  • Couzon, J. Dhainaut, C. Campagne, S. Royer, T. Loiseau, C. Volkringer, Porous textile composites (PTCs) for the removal and the decomposition of chemical warfare agents (CWAs) – A review, Coordination Chemistry Reviews 467 (2022) 214598.

2. Articles from 2024 to the present day

2026

  • Abreu Teles, C. Ciotonea, R. Palacio, D. Lopez, S. Royer, F. Richard, Ni–NbOx Bifunctional Catalysts for Selective Hydrodeoxygenation of m-Cresol to Toluene, Molecular Catalysis 588 (2026) 115516.
  • Antuch, R. Parra, C. Ciotonea, A. D. García, L. F. Desdin-Garcia, M. Sk, R. Thapa, S. Royer, The Origin of a Remarkable Methanol Electrooxidation Activity and the CO-Resilient Surface of the La0.85Fe0.90Cu0.05Pd0.05O3 Perovskite, Journal of Materials Chemistry A (2026), accepted.
  • J. Giraldo, J. Perez, C. Díaz, D. Lopez, S. Royer, C. A. Teles, F. Richard, R. Palacio, Bimetallic NiFe confined in SBA-15 for efficient Guaiacol hydrodeoxygenation, Applied Catalysis A: General 711 (2026) 120760.
  • Saxena, S. Patil, A. Prajapati, R. Thapa, S. Royer, P. Misra, Large-Area Freestanding 2D Ni/Co Vertical Heterostructure with Strong Interfacial Coupling for Efficient Oxygen Evolution Reaction, Nanoscale (2026; accepted in 2025).
  • Liaaychi, P. Blanchard, M. Marinova, C. Lamonier, J.-P. Dacquin, S. Royer, S. Laassiri, Dynamic Structural Evolution of 2D/3D MoS2@Ni Heterostructure supported on SBA-15 during CO2 RWGS reaction, EES Catalysis (2026), accepted.
  • Hammi, M. Q. Cai, Y. Q. Lu, G. Zhao, C. Ciotonea, S. Royer, S. Che, Elucidating the role of a triazine-rich COF shell in stabilizing UiO-66-NH2 for catalytic ozone decomposition, Journal of Hazardous Materials (2026), accepted.
  • Liaaychi, A. Sfeir, P. Blanchard, M. Marinova, A. Tougerti, H. Vezin, C. Lamonier, J.-P. Dacquin, S. Royer, S. Laassiri, High performance MoCx Nanoclusters engineered from 2D MoS2/SBA-15 for the CO2 RWGS Catalyst, ACS Applied Materials & Interfaces (2026), accepted.
  • Q. Lu, D. Yi, M. Marinova, S. Royer, N. Hammi, S. Chen, Y. Liu, Engineering cobalt-nitrogen-carbon interfaces on spherical supports for tunable furfural hydrogenation selectivity, ACS Sustainable Chemistry & Engineering (2026).
  • Tallouzt, K. Bakkouche, M. Majdoub, N. Katir, K. Anis, A. Kherbeche, S. Royer, A. El Kadib, Bismuth-Supported Mesostructured Silicas: Ligand-Directed Growth of Nanosheets for Sustainable Catalysis and Iodine Scavenging, Sustainability (2026).

2025

  • Sfeir, C. A. Teles, H. Vezin, M. Marinova, J.-P. Dacquin, S. Laassiri, S. Royer, Catalytic ammonia synthesis by supported molybdenum nitride: new insight into the support effect, ChemCatChem (2025) e202400494.
  • B. Jagdale, S. Ashok Patil, A. Pathak, M. Sk, R. Thapa, A. Sfeir, S. Royer, A. Kumar Samal, M. Saxena, Unveiling the Performance of Ultrathin Bimetallic CoxNi1-x(OH)2 Nanosheets for Pseudocapacitor and Oxygen Evolution Reaction, Journal of Materials Chemistry A 13 (2025) 1830–1841.
  • Deplazes, C. A. Teles, C. Ciotonea, P. Simon, E. El Rassi, J. Dhainaut, M. Marinova, F. Richard, N. Canilho, S. Royer, SBA-15 Supported Ni-Cu Catalysts for Hydrodeoxygenation of m-cresol to Toluene, ChemSusChem 18 (2025) e202400685.
  • Boundor, N. Katir, S. Royer, A. El Kadib, Gold Stabilized on Layered PDMS-like Porous Framework as Solvent-free Heterogeneous Catalyst for Hydroamination, ACS Applied Nano Materials 8 (2025) 639–648.
  • Di, R. Zhang, X. Guo, H. Shen, S. Royer, J. Jia, Y. Wei, Y. Li, L. Zheng, Efficiently catalytic purification of indoor formaldehyde upon Co-N sites derived from ZIF-67 carbonization, Fuel 380 (2025) 133152.
  • Hammi, M. Boundor, S. Chen, N. Couzon, A. El Kadib, A. Ferri, F. Pourpoint, T. Loiseau, C. Volkringer, S. Royer, J. Dhainaut, Evaporation-induced reticular growth of UiO-66-NH2 in chitosan films: adsorption of iodine, ACS Applied Materials & Interfaces 17 (2025) 3952–3961.
  • Khadiri, A. Anouar, C. Volkringer, S. Royer, J. Dhainaut, T. Loiseau, A. El Kadib, Alginate versus chitosan for templating growth and shaping HKUST-1 as porous beads, ChemistrySelect 10 (2025) e202500155.
  • Ashok Patil, P. B. Jagdale, A. Sfeir, M. Pathak, S. Royer, A. Kumar Samal, C. S. Rout, M. Saxena, Flexible micro-supercapacitors with high-energy-density Ni(OH)2 nanosheet: A scalable approach for enhanced volumetric performance, Journal of Energy Storage 121 (2025) 116526.
  • Tai, J. Dhainaut, S. Royer, R. Zhong, S. Chen, N. Hammi, Self-Assembly Synthesis of Cu-modified Urchin Flower-like Graphitic Carbon Nitride for Efficient Nitrophenol Reduction, Materials Today Chemistry (2025), accepted.
  • Ashok Patil, P. B. Jagdale, A. Iqbal, S. Reza, M. Jinagi, P. Rajput, A. Sfeir, S. Royer, R. Thapa, A. Kumar Samal, M. Saxena, Structural Engineering of Bimetallic NiMoO4 for High-Performance Supercapacitors and Efficient Oxygen Evolution Reaction Catalysts, Journal of Materials Chemistry A 13 (2025) 15782–15797.
  • Addou, A. Sfeir, M. Marinova, H. Vezin, J.-P. Dacquin, S. Royer, S. Laassiri, Simplified preparation of BaAl2O4-yey/C oxy-electrides using Pechini approach for ammonia synthesis, ChemSusChem 18 (2025) e202500682.
  • Díaz, A. Moreno-Zuria, A. Sfeir, S. Royer, L. Sierra, B. López, M. Mohamedi, R. Palacio, Mesoporous carbon supported nanoconfined NiCo2O4: a bifunctional electrocatalyst for rechargeable Zn-air and Zn-air flow batteries, Journal of Energy Storage 126 (2025) 117099.
  • Jagdale, S. Patil, A. Sfeir, S. Royer, A. Samal, M. Saxena, Engineering Ultrathin Co(OH)2 Nanosheets for High-Performance All-Solid-State Flexible Transparent Supercapacitors, ACS Applied Electronic Materials 7 (2025) 5516–5525.
  • Ashok Patil, P. B. Jagdale, N. Barman, A. Sfeir, M. Pathak, S. Royer, R. Thapa, A. Kumar Samal, M. Saxena, Ultrathin 2D Nickel/Cobalt Hydroxide Vertical Heterostructures: Unlocking High Energy Density for Flexible Symmetric Solid-State Micro-supercapacitor, ChemSusChem 18 (2025) e202500850.
  • Mohamad Ali, M. Chaghouri, H. L. Tidahy, M. Marinova, H. Guy, S. Durecu, S. Royer, E. Abi-Aad, C. Ciotonea, C. Gennequin, Impact of extrudes of Ni-Co catalysts for up-scale dry reforming of biogas, Chemical Engineering Journal 522 (2025) 167269.
  • Ungureanu, M. Bectoras, C. Ciotonea, C. Gennequin, S. Royer, C. Catrinescu, Iron oxide nanoparticles confined in SBA-15 via melt infiltration as efficient Fenton-like catalyst for lindane degradation, Journal of Environmental Chemical Engineering 13 (2025) 120462.

2024

  • Xu, J. Dhainaut, J.-P. Dacquin, J.-F. Lamonier, H. Zhang, S. Royer, On the role of cationic defects over the surface reactivity of manganite-based perovskites for low temperature catalytic oxidation of formaldehyde, Applied Catalysis B: Environmental 342 (2024) 123400.
  • Chaghouri, C. Ciotonea, M. Mohamad Ali, M. Marinova, P. Simon, E. Abi-Aad, S. Royer, C. Gennequin, Deposition precipitation derived Ni-Co active sites for enhanced dry reforming of methane performances, Catalysis Today 429 (2024) 114458.
  • Boundor, F. Sereci, N. Katir, S. Royer, A. El Kadib, Nanostructured viologen-phosphate bridged titanium dioxide frameworks: Tuning thermal growth for improving supercapacitance, Journal of Energy Storage 79 (2024) 110119.
  • -E. Plastiras, P. Bouquet, C. Lecoeur, J. Dhainaut, J.-P. Dacquin, S. Royer, T. Loiseau, A. Goffard, C. Volkringer, Cytotoxicity and effectiveness of archetypal Metal-Organic Frameworks (HKUST-1, UiO-66, MIL-53, MIL-125) against coronaviruses (HCoV-229E and SARS-CoV-2), Microporous and Mesoporous Materials 367 (2024) 112975.
  • Deplazes, C. Abreu Teles, C. Ciotonea, A. Sfeir, N. Canilho, F. Richard, S. Royer, Melt infiltration for the preparation of finely dispersed Ni-FeOx nanoparticles on SBA-15 for the hydrodeoxygenation of m-cresol, Catalysis Today 430 (2024) 114514.
  • Heidinger, S. Royer, J.-M. Giraudon, P. Simon, N. Bion, H. Alamdari, J.-F. Lamonier, Properties evolution of LaCoO3 Perovskite synthesized by Reactive Grinding – application to the toluene oxidation reaction, Journal of Environmental Chemical Engineering 12(2) (2024) 112107.
  • Couzon, P. Hardy, M. Ferreira, N. Hammi, J. Dhainaut, F. Pourpoint, S. Royer, T. Loiseau, C. Campagne, C. Volkringer, Green Synthesis of a MOF-based textile composites for the degradation of chemical warfare agents, Dalton Transactions 53 (2024) 5784–5787.
  • Sharma, U. Bhardwaj, M. Marinova, A. Da Costa, A. Ferri, S. Royer, H. Kushwaha, J. Dhainaut, Borophene: A Piezocatalyst, Chemical Communications 60 (2024) 5614–5617.
  • Boulos, F. Goc, T. Vandenbrouck, N. Perret, J. Dhainaut, S. Royer, F. Rataboul, Carbon-Supported Ru-Ni and Ru-W Catalysts for the Transformation of Hydroxyacetone and Saccharides into Glycol-Derived Primary Amines, ChemSusChem 17(11) (2024) e202400540.
  • B. Jagdale, S. A. Patil, A. Sfeir, N. Barman, A. Iqbal, S. Royer, R. Thapa, A. K. Samal, D. Ghosh, M. Saxena, Large-area ultrathin 2D Co(OH)2 nanosheets: A bifunctional electrode material for supercapacitor and water oxidation, Materials Today Energy 44 (2024) 101608.
  • Boulos, F. Goc, M. Marinova, N. Perret, F. Rataboul, S. Royer, J. Dhainaut, MOF-derived Ni-WxC/carbon catalysts: Application to cellulose conversion into glycols, ChemCatChem (2024) e202400548.
  • B. Jagdale, S. Ashok Patil, M. Pathak, P. Bhol, A. Sfeir, S. Royer, A. K. Samal, C. Rout, M. Saxena, Facile and Scalable Fabrication of Flexible Microsupercapacitor with High Volumetric Performance Based on Ultrathin Co(OH)2 Nanosheets, Journal of Materials Chemistry A 12 (2024) 17350–17359.
  • Boulos, F. Goc, N. Perret, F. Rataboul, J. Dhainaut, S. Royer, Cellulose Conversion to Glycols over Carbon Supported Ni-WxC Nanocatalyst: The N-Doping Effect on Catalyst Stability, ACS Applied Nano Materials 7(14) (2024) 16086–16096.
  • Ashok Patil, P. B. Jagdale, N. Barman, A. Iqbal, A. Sfeir, S. Royer, R. Thapa, A. K. Samal, M. Saxena, Ultrathin, large area β-Ni(OH)2 crystalline nanosheet as bifunctional electrode material for charge storage and oxygen evolution reaction, Journal of Colloid and Interface Science 674 (2024) 587–602.
  • Sfeir, C. E. Shuck, A. Fadel, M. Marinova, H. Vezin, J.-P. Dacquin, Y. Gogotsi, S. Royer, S. Laassiri, Unlocking the Potential of MXene in Catalysis: Decorated Mo2CTx Catalyst for Ammonia Synthesis under Mild Conditions, Journal of the American Chemical Society 146 (2024) 20033–20044.
  • Khadiri, C. Volkringer, S. Royer, A. El Kadib, T. Loiseau, J. Dhainaut, Chemical shaping of CPO-27-M (M=Co, Ni) through an in situ crystallization within chitosan hydrogels, Chemical Communications 60 (2024) 7717–7720.
  • Yeskendir, I. Kurzydym, P. Simon, N. Nuns, M. Marinova, H. Vezin, C. Courtois, Y. Lorgouilloux, I. Czekaj, J.-F. Paul, S. Royer, J.-P. Dacquin, J. Dhainaut, Insights into the Nature of Zr-species in MFI-Type Zr-Metallosilicates by Using Bulk and Surface Techniques, Microporous and Mesoporous Materials 378 (2024) 113261.
  • Khadiri, C. Volkringer, S. Royer, A. El Kadib, T. Loiseau, J. Dhainaut, Graphene oxide-containing chitosan@HKUST-1 beads with increased chemical stability for CO2 capture, Materials Today Sustainability 28 (2024) 100998.
  • Yildiz, J. Dhainaut, C. Ciotonea, J.-P. Dacquin, S. Royer, C. Courtois, Y. Lorgouilloux, Improving mechanical stability of SBA-15 monoliths prepared from polymeric scaffolds replication, using bentonite clay, Journal of Porous Materials 32 (publication 2024/2025) 1561–1569.